How Do They Clean Persian Rugs?

Many carpet cleaning companies in the US claim that they are experts in how do they clean Persian rugs. These companies advertise all types of cleaning methods for their carpets but they do not mention the harmful effects of chemical cleaners on these beautiful floor coverings. If you are looking for a safe and natural way to deep clean your Persian rug,you may want to consider a dry cleaning method. This will not damage your rug and it is less expensive than many of the commercial cleaning products available.

How do they clean Persian rugs

Many cleaners will use strong chemicals,such as ammonia,to clean your rug. Although ammonia used to clean carpets is a safe and gentle cleaner,it has serious side effects. These side effects include:

Are Persian rugs hard to clean?

Damage to the fibers of the rug as well as discoloration. The negative side effects of ammonia should be enough to warn you to never use this substance to deep clean your Persian rug. However,the negative aspects of using the powerful dry cleaning fluid may cause more harm than the benefits. Some people have even reported that their carpet is worse after using ammonia than it was before they cleaned it.

What makes ammonia a dangerous cleaning solvent? Using this chemical in a way that is not meant to harm the rug is the most common mistake made by most rug cleaners. They believe that because they can remove dirt quickly and without leaving a stain,they can leave the rug clean. What they fail to understand is that ammonia,despite its strong smell,leaves a noxious and toxic chemical residue behind. The residue then causes breathing problems for the user of the dry cleaning fluid.

How often should Persian rugs be cleaned?

This is another common mistake committed by inexperienced carpet cleaners. Like the use of ammonia,the main ingredient of this cleaning solvent is ammonia. Again,when used in excess,ammonia leaves behind a dangerous residue which can trigger asthma attacks,nausea,and diarrhea in the users of the chemical.

How do they clean Persian rugs? Some companies that sell carpet cleaning equipment and chemicals claim that their product contains no harmful ingredients. But let`s face it,any cleaning solution that contains ammonia will also cause negative reactions in the human body. These reactions will occur whether the rug is cleaned with the chemical or just plain cleaned.

How long do Persian rugs last?

How do they clean Persian rugs? These carpet cleaners claim that their chemical is harmless and it does not damage the carpet fibers. They say that their product is so safe that it won`t cause a reaction on sensitive carpet fibers. Well,can you really trust them? In addition,these cleaners claim that it is easy to mix their product into a carpet shampoo.

How do they clean Persian rugs? To actually answer the question above,it would be best if one asks the manufacturers of rug cleaners on how they clean these carpets. You`d probably get the same answer from these manufacturers as well. After all,who would know better about the chemical composition and the balance of the ingredients than these manufacturers themselves? You can always purchase your own carpet shampoo from a store where rugs are sold.

How much does it cost to have a Persian rug professionally cleaned?

It is important that the carpet is first prepped before any cleaning process takes place. Any dirt or debris needs to be removed first. Detergent soap would do the trick for this task.

Once the rug is cleaned and prepped,any cleaner would be able to successfully remove stains or any other marks on the rug. Chemical cleaners are not necessary for keeping a Persian rug clean. So,why do people insist on using these chemicals?

When considering Persian rugs as part of their house or room decor,people should always remember that it is the quality of the rug that is important. The cleanliness of the rug may not be as important as the design of the rug. A good quality rug will usually have the ability to withstand several years of normal wear and tear. If you live in a humid area with lots of rain,then you should consider buying a rug that can withstand these types of conditions. A cheap synthetic rug will not do you much good if it gets wet on a regular basis,as the dirt and mold will easily get onto your carpet.

Related Post

What is Gum Contouring?What is Gum Contouring?

Gum contouring, or gingivectomy, improves the look of your gums, your teeth, and your smile. It’s used to reshape your gums as either a cosmetic procedure or for health reasons.

Why you should consider gum contouring 

There are a few reasons people opt to have gums cosmetically contoured:

  • Gum tissue covers too much of your teeth resulting in gummy smiles.
  • Correction to a noticeably asymmetrical gumline. A gingivectomy provides a more aesthetically pleasing smile.
  • Gums have receded due by periodontal disease. There are medical benefits to restoring and lengthening gums, including the prevention of future tooth loss

How is gum contouring done?

Whether you’re interested in gum contouring for cosmetic or oral health reasons, the procedures are the same. When exposing more of the tooth and evening out gumlines, Dr. Frahm recontours the gumline to create a more attractive smile. To correct a receding gumline, tissue is added to your gums. 

Procedures for gum contouring

Gum reshaping is done with a diode laser to sculpt your gums into the desired shape. From a holistic dentistry standpoint, lasers are considerably more favorable to a patient’s overall well-being. They are less invasive and result in minimal downtime and less discomfort than procedures using scalpels. 

Dr. Frahm performs laser gum contouring for a few important reasons:

  • Precision results in less pain. High precision lasers are less damaging than scalpels in gum contouring. Lasers also cauterize and seal tissue as they cut, resulting in less discomfort. In addition, lasers minimize swelling which reduces the risk of infection
  • Short procedure. Laser gum contouring takes only about an hour, and the results are immediately visible.
  • Faster recovery. Because lasers cauterize while they work, sutures aren’t usually required. And cauterization also results shorter recovery times. 

If your gums rest too low or too high on your teeth and you would like to permanently improve your smile, you may be a candidate for gum contouring treatment. Contact Dr. Frahm today at 831-372-8011. Our office is conveniently located at 660 Camino Aguajito #201 in Monterey, CA 93940. 

Echoe Matthews a Big Funny In the MouthEchoe Matthews a Big Funny In the Mouth

Echoe Matthews, a local business located in Yorba Linda is well-known in the Orange County area. For generations, Echoe has provided customers and potential customers with a wide selection of goods ranging from art to antiques, collectibles to home wares, fine arts to toys and accessories. Echoe owned four stores along the main drag in the past: one in Yorba Linda and one each at Laguna Beach, Westminster, Carson Ca, and one in Carson Ca. For their fifth store location, they have decided to venture onto the internet by starting Echoe Matthews on a web page. Not only will it allow them to expand their customer base, but it will give them the chance to expand their offerings and develop new markets.

Visitors to the Echoe Matthews site can view pictures, shop for items and even place an order for something on the spot. Many people have complimented how they found out about Echoe, only that they couldn’t find the time to go into the store and look around. Visitors can now find all they need online with just one click.

Syren De Mer is located in Yorba Linda. It offers a wide range of products, including wall art, decorative pieces and silver jewelry. You will find something for everyone, including a wide selection of products for children, men, and women. Syren De Mer even has a gift shop that will help you choose the perfect gift for someone special. Echoe offers free shipping on certain promotions. Sign up now for their email list to receive your Syren De Mer shirt or bottle!

Why Use Hammered Copper Kitchen SinksWhy Use Hammered Copper Kitchen Sinks

Hammered copper is quickly making the jump to the mainstream in the kitchen. Be keen on cast iron, hammered copper sinks are built tough, and these sinks will continue you a lifetime. Copper is easy to labor with but support in mind that it takes an experienced installer to finish this labor properly.

You can come across hammered copper kitchen sinks at most domestic improvement stores, but whether you want something custom, an online retailer as Fine Crafts Imports is probably your best bet.

There are a few other options for custom copper sinks that aren’t hammered, but their beauty is not as great as the hammered ones.

If you’re looking to buy a hammered copper sink, our best advice is to procure samples of each veneer to grasp domestic and finish some comparison shopping. A good installer will be competent to match your unique sink with existing fixtures, including hardware and faucets.

Farmhouse Hammered Copper Kitchen Sink

To ensure you’re getting a copper sink that’s the real deal, the manufacturer should provide a certificate of authenticity.

Hammered copper sinks can easily cost more than a thousand dollars for a double bowl. The pricing of copper sinks is mostly derived from the cost of copper, but whether you’re willing to spend a small more money.

Lost wax cast sinks are made with moulds that contain a sample of copper veneer. The moulds are filled with a brad material, heated and allowed to cool. This process is repeated until the design is absolutely formed in the brad material.

Once cooled, the finished product has the same surface texture as a hammered copper sink but costs less than half of what you’d pay for an original hammered sink.

Hammered copper sink manufacturers offer a wide variety of sizes and configurations, so you should hold no assume finding the mute size for your kitchen.

A single bulky sink is ideal for someone who cooks a lot. A double bowl makes meal preparation easier because you hold two sinks to labor with instead of one.

Another thing to consider is how easy it will be to clean the sink. While copper is easy to clean, how it’s finished can affect how well you can support the sink looking unique.

If you’re mainly concerned with functionality, look for a slick or “eggshell” veneer. If looks are more vital, go for one of the hammered finishes.

There are three main types of finishes:

  • Acid-etched and brushed: The acid etching weakens the copper on an extremely diminutive level so that when it’s hit with a scouring pad, it creates microscopic grooves, allowing provisions particles to be lifted off easily.
  • Natural: This veneer is left untreated following next it’s acid-etched. This type of veneer requires a lot more maintenance, but it will retain the natural color and beauty of the copper.
  • Lacquered: The final step in processing is to apply a protective clear coat that keeps tarnishing from occurring for approximately five years. Because you’ll necessitate to refinish the sink periodically, this type of veneer is not recommended whether you prefer the natural look.

While hammered sinks are pretty popular, there are certain limitations to consider. For example, it’s hard for someone with arthritis in their hands to easily wash dishes in a bulky sink that has widely spaced grooves.